Ghost Lecter FS Unicorn II Mountain Bike XC brings the bling to the World Cup, as well as a new bike front bar!

This Lecter FS Unicorn II is a fully suspended mountain bike.  In preparing their race motorcycles, crew mechanics were buffing the spring pollen of the maximum blinded-out XC bike into the Novo Mesto World Cup pits before the weekend racing.  Although it was not racing at the World Cup, this extraordinary unicorn was built exactly like a staff bike, with a significant inventory after you recover from the flamboyant bikehead units…

2022 Ghost Lector FS Unicorn II XC Venture Bike

 

  (2022 Ghost Lector FS Unicorn II, 120mm Full Suspension XC Venture Bike with Ghost Factory Racing

We have already seen the Ghost Lector FS, a complete suspension in the 2020 Nov ನ Mesto World Cup music.  And the German emblem is primarily intended to launch new bikes right here 5 km from the Czech border – unique variations or prototypes.

In fact, Tom Wickles, the race staff supervisor, had his vivid red unicorn I superbike right here in the spring.  But the COVID rules of the time made that Wild Venture bike a wider audience.  In any case, that bike has become an extra, almost over-the-top customization, but it definitely brings the bling with a special strap that you can buy off the shelf…

Special edition details

  

  (2022 Ghost Lector FS Unicorn II, 120mm full-suspension XC venture bike with Ghost Factory Racing

Ghost Lecter FS Unicorn II is as unusual as its name, with a one-off complete structure and ending.  But the body is an Inventory Lector FS SF with the same lightweight carbon (LC) format as their six exclusive full carbon cross-U.  S.  A.  Full suspension construction options.

The 29er Lecter FS in particular has its suspension tour length-specific, so Tom’s length gets a 120mm rear-wheel tour that matches the 120mm SID Ultimate Fork.

  

  (2022 Ghost Lector FS Unicorn II, full suspension XC Venture bike with Ghost Factory Racing

Ghost calls the short-hyperlink 4-bar suspension traction link, primarily based on their long-haul Riot Path bike.  It uses a one-piece rear triangle for lightweight and stiffness, with carbon links on the outer sealed bearings linked to the front stop.

The rear suspension deals with the same RockShox SID Lux Ultimate shock, although there is no remote lockout or flight attendant for the Vickles, preferring a simpler, more complex setup.

  

  (2022 Ghost Lector FS Unicorn II, 120mm Full Suspension XC Venture Bike with Ghost Factory Racing

Ghost Lecter FS Unicorn Creation announces Instant Flush-Mount Eight Pins for the Clean Dropper that was deployed, and gets the Dropper Tour as fully as possible.  For XC and Marathon racers who want to hold multiple water bottles inside the main triangle, the bike additionally includes the device mount underneath an additional cage or toptube.

The Lector FS receives traditional modular inner cable routing and includes a 1.5 ″ tapered headset with an inner lock block.

  

  (2022 Ghost Lector FS Unicorn II, 120mm full-suspension XC venture bike with Ghost Factory Racing

The rest of the SRAM drivetrain is very simple – no extra hop carbon enhancements here.

The Carbon XX1 Crankset gets the Quark AXS Energy Metre and 4-Bolt 34T Chainring, linked to the XX1 AXS rear derailleur and black GX cassette with the Silver Eagle Chain – in fact experienced staff managers don’t have much Eagle cassette around that day!

The pedals are also an easy mid-range black Crankbrothers Candy 3s, even though Tom eventually promised them a gold titanium axle upgrade.

Bike front BiTurbo RS wheels

  

  (2022 Ghost Lector FS Unicorn II, 120mm full suspension XC venture bike with Ghost Factory Racing , bike next to Bitterbo RS wheels pit

Bike Ahead BiTurbo RS wheels are also a constant-catcher with their well-known uncooked carbon tip.  But those vivid chrome-out 6-sprokes I first noticed were peeking out from behind the workbench inside the pit of the Ghost Factory Racing crew at the Czech World Cup…

  

  (2022 Ghost Lector FS Unicorn II, 120mm full suspension XC venture bike with Ghost Factory Racing , Bike front Bitterbo RS wheels disc brake element)

The 27mm inner BiTurbo RS wheels have been around for about 7 years by the current method, but they are preserved to be a full pop up from the World Cup Cross-U.  S.  A.  Bikes are ultralight path bikes, or crazier venture bikes.

What really makes them so special is their sharp-topped appearance, as the German handmade wheels are 1249g with 29ers and ultra-stiff, but are said to be pretty tough for the down-U.  S.  A.  And misuse of route driving.

Ghost Factory Racing staff announced that it was one of his or her third season cycles and “now has no unmarried sickness to report.”

Inside, the crew uses peppy tire noodles for low-pressure flat protection.  And Tom prefers season-only 2.4 ″ Maxxis Aspen ST tires inside the Ultra-Supply 170TPI Seasoned Test Pilot Casing for fast, dry driving.  Or mixed with the 2.35 ″ Recon Race, but they want extra grip.

One thing to note, we’ve noticed a drawback with the mirror-like chrome finish that covers this bike… the pollen.  No matter how much you want to see your reflective image on a shiny mountain bike, mother nature is indispensable in the midst of the pine forest of spring!

Next up is The Unit Mountain Bike Handlebar

One new technology not seen by Bikehead Composites is their new The Unit One-Piece Carbon Handlebar and Stem Cockpit.  The 499 € (/ s) unit weighs just 215g on a low, low charge and must be equipped with several options.  Choose from 7.5 ° or 9.5 ° backsweep, 800 or 820mm widths, zero or 15mm increments, zero-to-12 ° powerful trunk angles, and powerful trunk length from 44-88mm.

Ultralight bars are e-bike rated, have an optional front GPS mount and 130kg Rider + Tools weight limit.

Tom’s cockpit is rounded out with trick detail pieces, the latest set of Guide Ultimate Brake Lever is set to the latest stage 2-piston callipers to pour or shed a single gram with hop carbon reservoir covers and connect.  Lever element altar with lighter callipers.  And Wolf Tooth’s Clean Bearing Round-the-Bar Remote Barycentric Dropper to manipulate the eight-pins dropper.

Oh yeah, and they go “full Zend” with some custom-engraved ESI silicone grips, a fab customization feature that every person can order and regularly overlook.

Toms Ghost Lecter FS Unicorn II is not out of the race bikes of Annie Terpstra and Carolyn Bohe, who completed each of these 1/3 spheres of the UCI XCO World Cup within the Pinnacle Ten…

Sources are Ghost-Bikes

Drive Pilots

We would like to bring technologically advanced plus environmentally friendly feature-rich vehicles details easier to understand everyone and related news,

Leave a Reply

Your email address will not be published. Required fields are marked *

Verified by MonsterInsights